Related knowledge points of Cut Resistant Work Gloves
Cut Resistant Work Gloves are metal gloves, woven from stainless steel wire to protect the user's hands from sharp objects. But do you know about Cut Resistant Work Gloves?
Let's follow Shanghai C&G to learn about some knowledge about Cut Resistant Work Gloves.
1. Performance effect:
a. Anti-cut, anti-stab, anti-skid, wear-resistant.
b. It has super cutting resistance, wear resistance and stab resistance.
c. It can effectively protect human hands from being cut by sharp blades such as knives.
d. Excellent anti-slip performance can protect objects from falling when grabbing.
2. Precautions for use:
a. The size of the gloves should be appropriate. If the gloves are too tight, it will restrict blood flow, which will easily cause fatigue and discomfort. If it is too loose, it will be inflexible to use and easy to fall off.
b. The selected Cut Resistant Work Gloves should have sufficient protection and meet the needs of the use environment.
c. Pay attention to the use of Cut Resistant Work Gloves. Do not use them in energized places or instruments to prevent them from being sent in dangerous situations such as entanglement and electric shock.
d. When removing gloves, be sure to pay attention to the correct method to prevent the harmful substances contaminated on the steel wire gloves from contacting the skin and clothes, causing secondary pollution.
e. Cut Resistant Work Gloves are not a panacea. The biggest weakness is that they are not resistant to cutting, puncturing, or cutting. If you use hard objects such as nails and knife tips to pierce the Cut Resistant Work Gloves directly, it will not have much protective effect. Dog bites, hedgehog bites.
f. It is not suitable to apply Cut Resistant Work Gloves when maintaining thorny flowers and plants. Since the Cut Resistant Work Gloves are made of stainless steel wire, there will be many small round holes that allow the thorns to pass through. Appropriate gloves should be used when maintaining flowers and plants to prevent injury.
g. Cut Resistant Work Gloves are designed for the safety of long-term industrial production. Under long-term application, the gloves may have small holes after continuous contact with sharp knives. If the holes in the gloves exceed 1 square centimeter, the gloves must be repaired or replaced.
3. Cleaning method:
a. Clean the gloves with soap solution (50°C) or boiling water (50°C) mixed with cleaning solution, at least once a day.
b Store the cleaned gloves in a cool and shady place.
c. Do not clean the stainless steel wire gloves by hitting hard blocks.
d. Try to prevent sharp objects from touching the surface of the glove during application.
