Shanghai, China +86-21-38214394 inquiry@cgprotection.com

Energy Absorbing EAL20201

Fall Protection System
<
>

Energy Absorbing EAL20201

View the C&G Catalogue

ENERGY ABSORBING 44MM WEBBING LANYARDS made up of 44 mm and 30mm wide polyester webbing from high tenacity polyester yarn having a different configuration of connectors on the ends.The loops at the ends are protected by an abrasion resistant covering.

If you need timely service, please contact us through online chat on our website
or Email: inquiry@cgprotection.com
WhatsApp: +8617317656853

C&G offers a wide range of Webbing Lanyards made from high tenacity polyester yarn having different   configurations of connectors on the ends. 
•  The Webbing Lanyards in this section are made up of 30 mm wide polyester webbing. 
•  The loops at the ends are protected by an abrasion resistant covering. This prevents the webbing from being damaged by the metallic contact of the connector.
•  C&G offers a wide range of Webbing Lanyards, having different configurations of connectors on the ends.
•  All C&G Lanyards are also supplied with any other hook on special request.

ENERGY ABSORBING 44MM WEBBING LANYARDS

• Made up of 44 mm and 30mm wide polyester webbing from high tenacity polyester yarn having a different configuration of connectors on the ends.
• The loops at the ends are protected by an abrasion resistant covering.  This prevents the webbing from being damaged by the metallic contact of the connector.
•  Available in lengths 1.0m, 1.5m, 1.8m, and 2.0m.
•  All C&G Lanyards are also supplied with any other hook on special request.
Energy Absorbing 4MM Webbing Lanyards EAL20201.webp
Energy Absorbing 4MM Webbing Lanyards EAL20201 750x750.webpEnergy Absorbing 4MM Webbing Lanyards EAL20201 750x750-1.webp

Related Products

Get in Touch

Interested in C&G's Services? Visit our Contact page and let us know!

Contact Now

Clothing used for protection in these scenarios is typically tested according to the BS EN ISO 11612 standard. This standard categorizes fabrics into three performance levels, which align with the aforementioned levels (Level 1, 2, and 3). The tables prov ... Clik for More

The main difference between FR (flame-resistant) and non-FR clothing is their ability to resist flames and thermal hazards. FR clothing is designed to self-extinguish when exposed to flames, preventing or limiting burn injuries. On the other hand, non-FR ... Clik for More

FR safety refers to the use of flame-resistant (FR) clothing and equipment to protect workers from fire and thermal hazards in the workplace. Both European and American standards have specific requirements and standards for FR safety.  ... Clik for More

The purpose of an arc flash study is to identify and evaluate the potential hazards associated with electrical arcs in a workplace, and to develop appropriate safety measures to protect workers from these hazards. The study is typically conducted by a qua ... Clik for More

An arc flash study is a comprehensive analysis of an electrical system to determine the potential hazards associated with electrical arcs and to establish appropriate safety procedures and personal protective equipment (PPE) requirements. ​​​​​​​An arc fl ... Clik for More

Once these factors are determined, the incident energy can be calculated using a variety of methods, including software programs, tables, and equations. The results of the incident energy calculation are then used to determine the appropriate level of PPE ... Clik for More

Incident energy is a measure of the thermal energy released during an arc flash event. It is the amount of energy per unit area that is generated by an electrical arc and is typically measured in calories per square centimeter (cal/cm2) or joules per squa ... Clik for More

Arc flash PPE (Personal Protective Equipment) levels and incident energy are both related to electrical safety in the workplace, but they refer to different asp ... Clik for More

Arc flash boundaries, on the other hand, refer to the distance from an arc flash hazard where a worker may be at risk of receiving a second-degree burn or worse if an arc flash incident were to occur. The arc flash boundary is established based on the pot ... Clik for More

© 2023 Shanghai C&G. All Rights Reserved.