Protection level and precautions of anti-smashing safety shoes

The position of the toe cap of the anti-smashing safety shoes can resist heavy objects and has strong anti-smashing performance. Even if a heavy object is pressed on the shoes, it can avoid the foot injury of the relevant staff, and the front of the foot and the toes will not be damaged. Carry out the impact test of safety shoes with a steel impact hammer of specified weight, when the toe cap is hit, the gap height under the toe cap should be less than the specified value, and the toe cap should not have any penetrating cracks in the direction of the detection axis.

There are five main protection levels of anti-smashing safety shoes.

1. The An1 protection level is the first, mainly used in metallurgy, mines, ports, ships, loading and unloading, quarrying, heavy industry, and other workplaces;

2. The An2 protection level can meet the usual anti-smashing and anti-collision functions, and is used in machinery, construction, petrochemical and other workplaces.

3. The An3 grade anti-smashing safety shoes are mainly used in electronics, food, hospitals and other fields.

4. The An4 anti-smashing safety shoes are used in workplaces such as the textile industry.

5. The protection level of An5 is the worst, and it is also used in the textile industry and other workplaces where the hazard is relatively small.

There are 4 problems that need to be paid attention to in anti-smashing safety shoes

1. Anti-smashing safety shoes must not only be of the appropriate type according to the operating conditions, but also fit the feet and be comfortable to wear.

2. Anti-smashing safety shoes must have a non-slip design, not only to protect people's feet from injury, but also to prevent operators from slipping.

3. Before using anti-smashing safety shoes, carefully check whether there is any damage or cracks. Broken shoes must be avoided in electrical and acid-base work, because it may cause major safety problems.

4. After use, the anti-smashing safety shoes must be properly kept. They need to be washed with water or disinfectant and dried to increase their lifetime. Be sure to replace or repair immediately in case of glue opening or broken bottom.

The above is the introduction about the protection of anti-smashing safety shoes provided by the editor of Shanghai C&G. I hope it will be helpful for you to understand the anti-smashing safety shoes! Anti-smashing safety shoes can usually be used for 6 months to a year, and the specific lifetime depends on your usual usage.