| Shanghai C&G

Item	Details
Brand	Chengge
Product Name	Firefighter Proximity Protective Suit
Model	FBH-F/B
Standard	XF634-2015 “Firefighter Thermal Protective Clothing”. The suit consists of a hood (with helmet), protective jacket (with SCBA backpack compartment), protective trousers, gloves, and boots.
Product Description	The complete proximity suit includes a jacket, trousers (or one-piece suit), hood, gloves, and protective boots. It must be worn as a full set during use. Before use, the integrity of the entire suit must be inspected. Entry into the work site is strictly prohibited if the suit does not meet performance requirements.
Overall Thermal Protective Performance	TPP 47.7 cal/cm²
Flame Resistant Performance	(1) Outer layer char length (warp & weft): 3 mm; (2) Afterflame time: 0 s, no melting or dripping; (3) Afterglow time: 0 s, no melting or dripping
Flame Resistance Performance	At 1000°C for 30 seconds, inner surface temperature rise ≤ 25°C
Outer Layer Tensile Strength	Warp: 2200 N; Weft: 1200 N
Outer Layer Tear Strength	Warp: 120 N; Weft: 180 N
Glove Dexterity	Under test conditions, able to pick up a minimum test rod diameter of 8.0 mm; Dexterity level: Grade 3
Face Shield Feature	Anti-fog / defogging function
Weight	≤ 10 kg
Additional Features	Permanent washing label; RFID chip (product data identification) available for bulk orders; Available in large, medium, and small sizes
Certification	Test report issued by National Special Labor Protection Equipment Quality Supervision & Inspection Center (Jiangsu) / Jiangsu Special Safety Protection Products Quality Supervision & Inspection Center, with all test items within accredited scope

Get in Touch

Interested in C&G's Services? Visit our Contact page and let us know!

Contact Now

Clothing used for protection in these scenarios is typically tested according to the BS EN ISO 11612 standard. This standard categorizes fabrics into three performance levels, which align with the aforementioned levels (Level 1, 2, and 3). The tables prov ... Clik for More

The main difference between FR (flame-resistant) and non-FR clothing is their ability to resist flames and thermal hazards. FR clothing is designed to self-extinguish when exposed to flames, preventing or limiting burn injuries. On the other hand, non-FR ... Clik for More

FR safety refers to the use of flame-resistant (FR) clothing and equipment to protect workers from fire and thermal hazards in the workplace. Both European and American standards have specific requirements and standards for FR safety. ... Clik for More

The purpose of an arc flash study is to identify and evaluate the potential hazards associated with electrical arcs in a workplace, and to develop appropriate safety measures to protect workers from these hazards. The study is typically conducted by a qua ... Clik for More

An arc flash study is a comprehensive analysis of an electrical system to determine the potential hazards associated with electrical arcs and to establish appropriate safety procedures and personal protective equipment (PPE) requirements. An arc fl ... Clik for More

Once these factors are determined, the incident energy can be calculated using a variety of methods, including software programs, tables, and equations. The results of the incident energy calculation are then used to determine the appropriate level of PPE ... Clik for More

Incident energy is a measure of the thermal energy released during an arc flash event. It is the amount of energy per unit area that is generated by an electrical arc and is typically measured in calories per square centimeter (cal/cm2) or joules per squa ... Clik for More

Arc flash PPE (Personal Protective Equipment) levels and incident energy are both related to electrical safety in the workplace, but they refer to different asp ... Clik for More

Arc flash boundaries, on the other hand, refer to the distance from an arc flash hazard where a worker may be at risk of receiving a second-degree burn or worse if an arc flash incident were to occur. The arc flash boundary is established based on the pot ... Clik for More

Catalogue

Firefighter Proximity Protective Suit

Firefighter Proximity Protective Suit

Related Products

Aluminized Gloves

Flame-retardant, abrasion-resistant, and tensile-resistant k

Firefighter Turnout Gear, ZFMH-CG A(DRD)

Firefighting Covering

Firefighter Turnout Gear, ZFMH-CGH(DRD)

Firefighter Proximity Protective Suit

Firefighter Turnout Gear, HRPro-J/P

Type 20 Firefighting Emergecy Rescue Suit

Aluminized thermal insulation clothing

Get in Touch

Get In Touch

Products

C&G Safety Solutions

Personal Protective Clothing

Popular Links

Firefighter Proximity Protective Suit

Firefighter Proximity Protective Suit

Related Products

Get in Touch

What are the risk levels for working with molten metals?

What is the difference between FR and non-FR clothing?

What is FR safety?

What is the purpose of an arc flash study?

What is an arc flash study?

How is incident energy calculated?

What is incident energy?

What is the difference between arc flash PPE levels and incident energy?

What is the difference between arc flash PPE levels and arc flash boundaries?

Make an Inquiry

Get In Touch

C&G Safety Solutions

Popular Links